Motorola RFS7000 Series System Reference Guide

Network Setup
4-58
5. Refer to the Traffic field for the following information (both received and transmitted):
6. Refer to the RF Status field for the following information:
7. Refer to the Errors field for the following information:
Pkts per second Displays the average total packets per second that cross the
selected WLAN. The Rx column displays the average total packets
per second received on the selected WLAN. The Tx column displays
the average total packets per second sent on the selected WLAN.
The number in black represents this statistic for the last 30 seconds
and the number in blue represents this statistic for the last hour.
Throughput Displays the average throughput in Mbps on the selected WLAN.
The Rx column displays the average throughput in Mbps for
packets received on the selected WLAN. The Tx column displays
the average throughput for packets sent on the selected WLAN.
The number in black represents this statistic for the last 30 seconds
and the number in blue represents this statistic for the last hour.
Avg Bit Speed Displays the average bit speed in Mbps on the selected WLAN.
This includes all packets sent and received. The number in black
represents this statistic for the last 30 seconds and the number in
blue represents this statistic for the last hour.
Non-unicast Pkts Displays the percentage of the total packets for the selected WLAN
that are non-unicast. Non-unicast packets include broadcast and
multicast packets. The number in black represents this statistic for
the last 30 seconds and the number in blue represents this statistic
for the last hour.
Avg MU Signal Displays the average RF signal strength in dBm for all MUs
associated with the selected WLAN. The number in black
represents this statistic for the last 30 seconds and the number in
blue represents this statistic for the last hour.
Avg MU Noise Displays the average RF noise for all MUs associated with the
selected WLAN. The number in black represents this statistic for
the last 30 seconds and the number in blue represents this statistic
for the last hour.
Avg MU SNR (dB) Displays the average Signal to Noise Ratio (SNR) for all MUs
associated with the selected WLAN. The Signal to Noise Ratio is
an indication of overall RF performance on your wireless network.
Average Number of
Retries
Displays the average number of retries for all MUs associated with
the selected WLAN. The number in black represents this statistic
for the last 30 seconds and the number in blue represents this
statistic for the last hour.
% Gave Up Pkts Displays the percentage of packets the switch gave up on for all
MUs associated with the selected WLAN. The number in black
represents this statistic for the last 30 seconds and the number in
blue represents this statistic for the last hour.
% Undecryptable Pkts Displays the percentage of undecryptable packets for all MUs
associated with the selected WLAN. The number in black
represents this statistic for the last 30 seconds and the number in
blue represents this statistic for the last hour.

Motorola RFS7000 Series Specifications

General

Brand	Motorola
Model	RFS7000 Series
Category	Switch
Language	English