To import a configuration, go to System Management
Maintenance Configuration Import. Enter the
configuration file path/name and click Submit. The NPort 6000’s configuration settings will be updated
according to the configuration file. If you also wish to import the IP configuration (i.e., the NPort 6000’s IP
address, netmask, gateway, etc.), make sure that Import all configurations including IP configurations
is checked off.
To export a configuration, go to System Management, Maintenance, Configuration Export and click
Download. A standard download window will appear, and you will be able to download the configuration into
a file name and location of your choice.
Load Factory Defaults
To Next Page
Loading...
