Moxa Technologies NPort 6000 Series - 3 Initial IP Address Configuration

3
3. Initial IP Address Configuration
When setting up the NPort 6000 for the first time, the first thing you should do is configure its IP address. This
chapter introduces the different methods that can be used. Refer to Chapter 9, System Management
Settings, for more details about network settings.
The following topics are covered in this chapter:

Static and Dynamic IP Addresses

Factory Default IP Address

Configuration Options
 NPort Search Utility
 Web Console
 LCM Console/Front Panel (NPort 6610, 6650, and 6450 only)
 ARP
 Telnet Console
 Serial Console