Overview
The Documentation & Software CD included with your NPort 6000 is designed to make the installation and
configuration procedure easy and straightforward. This auto-run CD includes NPort Windows Driver Manager
(for COM mapping), NPort Search Utility (to broadcast search for all NPort 6000’s accessible over the network),
the NPort 6000 User’s Manual, and the NPort firmware upgrade utility.
NPort Windows Driver Manager
Installing NPort Windows Driver Manager
NPort Windows Driver Manager is intended for use with NPort 6000 serial ports that are set to Real COM mode.
The software manages the installation of drivers that allow you to map unused COM ports on your PC to serial
ports on the NPort 6000. These drivers are designed for use with Windows 98/ME/2000/XP/2003. When the
drivers are installed and configured, devices that are attached to serial ports on the NPort 6000 will be treated
as if they were attached to your PC’s own COM ports.
1. Click the INSTALL COM Driver button in the NPort Installation CD auto-run window to install the NPort
Windows Driver. Once the installation program starts running, click Yes to proceed.
2. Click Next when the Welcome screen opens, to proceed with the installation.
Click Next to install program files to the default directory, or click Browse to select an alternate location.
To Next Page
Loading...
Need help?
General
