NPort 6000 Series System Management Settings
Received IP datagram packets.
Received but discarded IP datagram packets.
Sent IP datagram packets.
Sent but discarded IP datagram packets.
Received IP datagram packets.
Received but discarded PPP datagram packets.
Received but discarded IP datagram packets due to errors in IP headers.
Received IP datagram packets for wrong route.
Locally addressed IP datagram packet received successfully but discarded for
not matching one of TCP, UDP, ICMP protocols offered by CN2500.
Sent IP datagram packets.
Sent but discarded IP datagram packets.
Sent datagram packet discarded for invalid destination IP address.
Received packets of ICMP messages.
Sent packets of ICMP messages.
Received packets from remote Ping request.
Responding packets to remote Ping request.
Received packets from local ping request.
Responding packets to local ping request.
UDP statistics
Received UDP datagram packets.
Received UDP datagram packets with invalid destination port.
Received UDP datagram packet with incorrect header.
Sent UDP datagram packets.
TCP statistics
Total received packets of segments, including error packets.
Error packets (e.g., bad TCP checksums).
The counter of TCP connections for which the current state is either
ESTABLISHED or CLOSE-WAIT.
Received TCP datagram packets with invalid destination port.
Total sent packets, including those on current connections.
Retransmitted packets.
Network Module
Check the information and status of the Network Module inserted in the NPort 6000.