7. Select Client, and then click Add. Enter the NPort 6000’s IP address in the IP address field. Enter the NPort
6000’s RADIUS key in the password field. This must match the RADIUS key that you set in the NPort 6000
console.
8. Click Apply.
9. Right click RADIUS in the left information window, and select Start. You will now see that RADIUS is
running.
Setting up Windows 2000 Hosts
1. Open Start Programs Administrative Tools Routing and Remote Access.
2. Right click Server (Local) and select Configure and Enable Routing and Remote Access. Click Next
to continue.
3. Select Remote access server and click Next to continue.
To Next Page
Loading...
Need help?
General
