Moxa Technologies NPort 6000 Series - Configuration

NPort 6000 Series Dynamic Domain Name Server
C-2
The above screenshot shows how DHCP can be set up to update the DNS.
Currently, the NPort 6000 supports DNS service as provided by DynDNS. For detailed information on this option,
please visit https://www.dyndns.com
.
Configuration
DDNS (default=Disable):Use this field to enable or disable DDNS.
Server address (default=DynDns.org): Currently, DynDns.org is the only option available for Server address.
Host name: In this field, use the name that you created on www.dyndns.com. The NPort 6000 will update the
DynDNS server with this host name.
Username: This is the user name used for update authentication.
Password: This is the password used for update authentication.