NPort 6000 Series Introduction
-485 Data Direction Control: ADDC® (Automatic Data Direction Control)
15 KV ESD protection for all signals
Dedicated RS-232 console port on rear panel (8-pin RJ45)
Serial Communication Parameters
None, Even, Odd, Space, Mark
RTS/CTS, DTR/DSR, XON/XOFF
50 bps to 921.6 Kbps (supports non-standard baudrates)
Pull High/Low Resistor for
Terminator for RS-485: 120 Ω
-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
-422: Tx+, Tx-, Rx+, Rx-, GND
-485-4w: Tx+, Tx-, Rx+, Rx-, GND
-485-2w: Data+, Data-, GND
SD socket (supports up to 2 GB)
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1/V2c/V3, HTTP, SMTP, ARP,
Web Console, Serial Console, Telnet Console, Windows Search Utility
Windows Real COM Drivers:
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7 x86/x64,
Embedded CE 5.0/6.0, XP Embedded
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6,
Solaris 10, FreeBSD, AIX 5.x
Linux kernel 2.4.x, 2.6.x
Real COM, TCP Server, TCP Client, UDP, Pair Connection, RFC2217, Terminal, Reverse Telnet,
Ethernet Modem, Printer, PPP, Disabled
Secure: Secure Real COM, Secure TCP Server, Secure TCP Client, Secure Pair Connection, SSH, Reverse SSH
Without ears: 440 x 195 x 44 mm (17.32 x 7.68 x 1.73 in)
With ears: 480 x 195 x 44 mm (18.9 x 7.68 x 1.73 in)