membraPure GmbH
Wolfgang-Küntscher-Str.14
16761 Hennigsdorf
Germany
Tel.: +49 (0) 3302/201-20 0
Fax.: +49 (0) 03302/201-20 21
E-Mail: info@membrapure.de
Internet: www.membrapure.de
3 System Features
3.1 General
The Aquinity² system is designed for the production of analytical grade ultra pure water
from drinking water public municipal supply. The system combines the advantages of
reverse osmosis with final purification. Permeate from the reverse osmosis is temporarily
stored inside a tank. In a purification section ultra pure water with permanent highest
quality will be produced, supplied with the dispenser at the front side of the unit.
Currently recorded data and warning messages will be displayed on the system monitor.
All components of the system are assembled in a designed plastic housing. The housing
can easily be opened for the access of the modules. The system corresponds to the latest
technology and to recent safety regulations. It can be installed and put into operation
without the help of customer service.
Figure 1: Aquinity²E or P
To Next Page
Loading...