MP Aquinity 2 E - Operating Hours; Manual Stand by

System Control Panel
membraPure GmbH
Wolfgang-Küntscher-Str.14
16761 Hennigsdorf
Germany
Tel.: +49 (0) 3302/201-20 0
Fax.: +49 (0) 03302/201-20 21
E-Mail: info@membrapure.de
Internet: www.membrapure.de
page 34
5.4.4 Operating hours
- Press the button „Op.Hours”
- This page shows the lifetime of each components*
of the system in hours and in %- of its lifetime.
*Components:
P1: Pump 1 // ProPak: pretreatment module //
C.Modul: Conditioning module // P2: Pump 2 //
UPW: polisher module // UVPW: UV-lamp in purewater //
UVT: UV-lamp inside tank // UFPW: UF-module in purewater
5.4.5 Manual stand by
- Press the button „STANDBY”
The system will be put in stand by immediately
- The system will start the production again by
pressing the “Start” button