9 Service setup
In service setup it is able to set limits, to change operating hours counters or load backup-
datas of the configuration settings. Manual, functional switching of all actors is possible.
The service setup is password protected and only available for trained service
technicians. Improper operation or incorrectly stored configuration settings may
lead to malfunction or damage to the device
- Service setup is only available for service technicians
from membraPure GmbH
- To enter the service setup please enter the monthly
generated password which is provided by
membraPure GmbH and confirm entry with “OK”
The service menu has three pages of sub-menus.
- Touch the arrow-keys which are located at the
bottom of the screen to switch between the sub-
menus.
9.1.1 Adjustment conductivity sensors Q and temperature T
- Press the button „Q-Setup”
- Click the pull-down menu to choose the conductivity
sensor
To Next Page
Loading...