MP Aquinity 2 E - Replacement of UV-Submersible-Lamp

Care and maintenance
membraPure GmbH
Wolfgang-Küntscher-Str.14
16761 Hennigsdorf
Germany
Tel.: +49 (0) 3302/201-20 0
Fax.: +49 (0) 03302/201-20 21
E-Mail: info@membrapure.de
Internet: www.membrapure.de
page 40
6.5 Replacement of UV-submersible-lamp
Figure 17: Backcover UV-submersible-lamp
- Turn off the submersible lamp by unplugging the power adapter out of the electrical
outlet
- Unscrew the submersible lamp out of the tank.
Figure 18: Backcover UV-submersible-lamp
- Put the submersible lamp out of the tank carefully.
- Unplug the UV lamp and remove it.
- Insert the new UV-lamp carefully without touching the glass with your fingers.
- Plug the cap on the new UV lamp.
- Reset the operation hours counter. Please follow the steps in chapter 5.2.3 or
manually in chapter 5.4.3 to do that.