MP Aquinity 2 E - Exchanging UV-Lamp (in the Pure Water Section); Exchanging UV Submersible Lamp (in the Tank)

System Control Panel
membraPure GmbH
Wolfgang-Küntscher-Str.14
16761 Hennigsdorf
Germany
Tel.: +49 (0) 3302/201-20 0
Fax.: +49 (0) 03302/201-20 21
E-Mail: info@membrapure.de
Internet: www.membrapure.de
page 27
5.2.2 Exchanging UV-lamp (in the pure water section)
- Press “CHANGE UV-Water” to start the tool
- Waiting few seconds to release system pressure
- Exchange the UV lamp (see also chapter 6.4), then
click “Confirm”
- To reset the operation hours please enter the code
which is provided by membraPure GmbH
5.2.3 Exchanging UV submersible lamp (in the tank)
- Press the button “CHANGE UV-Water” to start the
tool (see also chapter 6.56.4)