membraPure GmbH
Wolfgang-Küntscher-Str.14
16761 Hennigsdorf
Germany
Tel.: +49 (0) 3302/201-20 0
Fax.: +49 (0) 03302/201-20 21
E-Mail: info@membrapure.de
Internet: www.membrapure.de
3.6 Hardware
3.6.1 Dispenser
Figure 6: Standard dispenser
The dispenser has a lock function to make water tapping easier. Moreover, the dispenser
will stay in a fixed position which has increased its flexibility (no draw back function) and
gives the user more comfort when tapping water. This has been set as a standard
dispenser for pure water system and memtap system (optional).
3.6.2 Control PCB
Water system has a control pcb which provides communication between main computer
system and analog- & digital-sensors. This pcb has been flashed with a firmware (Firmware-
Version 0.13.8) with a watchdog function. If there is any problem with sensor reads, this
control pcb will restart the system automatically after ca. 2 minutes
To Next Page
Loading...