OPERATING AND MAINTENANCE MANUAL
Risk analysis: residual risk
HAS T 070÷140
100
The data in this manual are not binding and they can be modified by the manufacturer without notice. Reproduction of this manual is strictly prohibited
ENGLISH
EN
23. Inadvertent start-up, overtravel/
unexpected excess speed (or any other
similar malfunction) caused by: return
of electric power supply after failure.
Hazards associated with inadvertent
start-up of the machine when electric
power supply is restored.
Strictly observe all manual
instructions. Chapter 2 “Safety”;
4.3.5 “Electrical connections” and
Chapter 5 “Start-up”
24. Inadvertent start-up, overtravel/
unexpected excess speed (or any other
similar malfunction) caused by
external factors on the electrical
equipment (EMC).
Electrical hazards associated with
electric stress on internal machine
components, short circuits and
overloads.
Strictly observe all manual
instructions.
Chapter 2 “Safety”; 4.3.5 “Electrical
connections”and Chapter 8
“Operation and maintenance”
25. Hazards caused by assembly errors. Hazards associated with machine
instability caused by vibrations.
Hazards on contact with operating
fluids, risk of pollution due to
dispersion of fluids into the
environment.
Strictly observe all manual
instructions. Chapter 2 “Safety”;
Chapter 4 “Installation” and Chapter
5 “Start-up”
26. Risk of falling or projection of objects
or fluids.
Contact of body parts with metallic
materials such as the fan blades or
moving parts of the compressor.
Disconnect the machine from the
electrical mains during interventions
on the hydraulic circuit.
Strictly observe all manual
instructions.
Chapter 2 “Safety”; Chapter 4
“Installation” and Chapter 8
“Operation and maintenance”
27. Loss of stability/upturning of machine. Crushing of body parts. Strictly observe all manual
instructions.
Chapter 4 “Installation” and
instructions on packaging.
28. Loss of stability/upturning of machine
due to installation on unstable ground
and/or vibrations generated on
connection pipelines.
Crushing of body parts due to
upturning of the machine, contact of
body parts with water due to failure
of connections to the hydraulic circuit
caused by excessive vibrations.
Strictly observe all manual
instructions.
Chapter 4 “Installation”and Chapter
5 “Start-up”
29. Hazards generated by absence of and/
or position of measures/instruments
influencing safety: all guards.
Hazard of contact, due to sudden
ejections, with machine components
and processed or used materials.
Strictly observe all manual
instructions.
Chapter 2 “Safety”; Chapter 4
“Installation”; Chapter 5 “Start-
up”and Chapter 8 “Operation and
maintenance”
30. Hazards generated by absence of and/
or position of measures/instruments
influencing safety: graphic safety
signs.
Hazard associated with the lack of or
inadequate graphic instruction and
warning symbols related to dangers
that could not be eliminated in
design.
The operator must observe all
graphic safety signs on the machine
and replace when worn or illegible.
Strictly observe all manual
instructions.
Chapter 1 “General information”
31. Hazards generated by absence of and/
or position of measures/instruments
influencing safety: manual.
Hazards associated with incorrect
preparation of the manual due to lack
of and/or unclear information
required to ensure operator safety and
safe use of the machine.
Consult all sections of the manual.
32. Hazards generated by absence of and/
or position of measures/instruments
influencing safety: disconnection of
power sources.
Contact with live parts, contact with
high pressure fluids or gas.
Strictly observe all manual
instructions. Chapter 2 “Safety” and
4.3.5 “Electrical connections”
33. Hazards generated by absence of and/
or position of measures/instruments
influencing safety: instruments and
accessories for adjustments and/or
maintenance in safety conditions.
Hazard of cutting, ejection of fluids
or gas at high pressure, scalding, or
vibrations caused by incorrect
maintenance.
Strictly observe all manual
instructions. Chapter 2 “Safety”;
Chapter 4 “Installation”; Chapter 8
“Operation and maintenance”
Description of risk: Effect: User instructions:
To Next Page
Loading...