Multiplex COCKPIT SX MLINK - Alarm Thresholds; Setting Up a New Model: EASY; Managing Model Memories; Transmitting FAIL-SAFE Positions

COCKPIT SX M-LINK
MULTIPLEX Modellsport GmbH & Co.KG • Westliche Gewerbestraße 1 • D-75015 Bretten (Gölshausen) • www.multiplex-rc.de Page 18
12.3. Alarm thresholds....................................................................................................................................25
12.4. Special features when using the C
OCKPIT SX M-LINK with a vario / altimeter sensor ..............................25
12.5. Link Quality Indication (LQI)...................................................................................................................26
12.5.1. Display of LQI value on the transmitter’s integral screen.........................................................................26
12.5.2. Definition of terms..................................................................................................................................26
12.5.3. Indicated range of LQI values.................................................................................................................26
12.5.4. Interpreting the LQI value.......................................................................................................................26
13. Setting up a new model, Model type: EASY ..............................................................26
13.7.4. Model type EASY: changing the standard assignment for receiver output 5 (aileron),
Menu: (MIXER) AI->S5 .....................................................................................................................26
15. Setting up a new model, Model type: ACRO ..............................................................27
15.9. Activating flight phases ..........................................................................................................................27
18. Managing model memories, Menu: MEMO .................................................................27
18.6. Transmitting FAIL-SAFE positions to the receiver, Menu: (MEMO) SENDFS ..........................................27
18.7. Activating / disabling Fast Response (fast frame rate), Menu: (MEMO) F-RESP....................................27
20. Trainer mode operations.............................................................................................28
20.2. The COCKPIT SX M-LINK as Pupil transmitter.........................................................................................28
21. Accessories and spare parts......................................................................................28
22. Multi-function socket interfaces.................................................................................28
22.1. PC socket for flight simulator..................................................................................................................28
22.2. PC socket for data back-up / update.......................................................................................................29
Changes in firmware version V3.xx and later
Firmware version V3.00:
Introduction of the MULTIPLEX M-LINK 2.4 GHz transmission system for the C
OCKPIT SX M-LINK.
Firmware version V3.04:
This firmware version substantially expands the telemetry capability of the C
OCKPIT SX M-LINK transmitter. In
conjunction with telemetry-capable M-LINK receivers and external M-LINK sensors the following facilities are available:
x Visual output of the actual receiver battery voltage and radio link quality (LQI = Link Quality Indication) as standard.
x Up to eight telemetry values can be displayed on the transmitter’s integral screen.
x Alarm thresholds can be set individually. If an alarm threshold for a particular sensor value is exceeded, an audible
alarm is triggered, and the corresponding value is displayed on the transmitter screen.
x If a vario / altimeter sensor (# 8 5416) is connected to the system, the visual display output can be supplemented by
audible feedback for climb and sink, switchable using a momentary switch on the transmitter.
x Extended sound set, allowing the use of audible signals (rising / falling vario sounds) to complement the transmitter’s
expanded telemetry capability.
We all hope you enjoy using your system.
Yours - the MULTIPLEX team
Chapter references
Î  x. refers to Chapter in the tri-lingual operating instructions (manual)
Î x. refers to Chapter in this supplement