Creating and customising models
14. Choose a P1 and P5 setting so that control surface travels on the right aileron
are identical to those on the left aileron:
o Open the input field P1.
o Press the F button.
Both ailerons move to the negative maximum.
o Use P1 to align the negative travel of the right aileron with that of
the left aileron.
o Open the input field P5.
o Press the F button.
Both ailerons move to the positive maximum.
o Use P5 to align the positive travel of the right aileron with that of
the left aileron.
o Repeat these steps for the points P2 and P4. P3 shifts the neutral
position without changing the other points.
To Next Page
Loading...
