-97- Contacts
Basic Operations
The following shows the basic operations of the Contacts.
To Register a New Entry in the Contact
To Add a New Contact Group
Email 3 email addresses
Note : Though an email address can contain
up to 90 single-byte characters when
you register the Contact entry, it is
limited to 31 single-byte characters
when you send video calls.
URL One homepage address (256 single-byte
characters max).
To Do this
1 Start the Contacts function Press the MENU key and select Contacts, or press the Up or
Down key.
2 Start a new contact entry Press the Options menu key, and select Add contact.
3 Fill in the data Fill in data on the displayed Add contact screen and press the
SK1 (OK).
Note : You can select Add contact method, depending on the
number of items provided in the Add contact screen.
On the contact list, press the Options menu key, and
select Settings and Set add method. Select a method
from Quick add and Standard method.
The input data is saved as a contact entry.
To Do this
1 Access the Contact list Press the MENU key and select Contacts.
Press the Options menu key and select Contact groups.
Data Phone Contact List
To Next Page
Loading...
