NEC e616 - Settings

-129- Connections
To perform OTA remote synchronisation
To perform over-the-air remote synchronisation with a ‘3’ server, follow the steps below:
Synchronisation Options
Press the MENU key Æ External connection Æ Synchronisation Æ Select a Server Æ Press ‘Options
menu’ key
.
5 End synchronisation When the synchronisation is completed, the function ends.
Note : If an error occurs during synchronisation, an error
message will be displayed and synchronisation will end.
Note : You can cancel the synchronisation operation by
pressing the End key.
To Do this
1 Start the connection Press the MENU key Æ External connection Æ
Synchronisation.
2 Start synchronisation Select the remote server to synchronise, press the SK1 (Start).
Selected data will be synchronised between the e616 and the
remote ‘3’ server.
3 End synchronisation When the synchronisation is completed, the function ends.
Note : If an error occurs during synchronisation, an error
message will be displayed and synchronisation will end.
Note : You can cancel the synchronisation operation by
pressing the End key.
Item Description
Synchronise Starts the synchronisation of updated data with the selected
server.
Server settings Displays the server settings screen for the selected server
To Do this