Connections -130-
To Register a Server
The NEC e616 allows you to set-up and synchronise with servers other than the default local and remote
servers already present. A maximum of 10 servers can be registered.
To do this, follow the steps below:
Synchronisation Settings
Press the MENU key Æ External connection Æ Synchronisation Æ Select a Server Æ press SK2
(Settings)
An explanation of the different server settings is detailed below:
Synchronise all Starts the synchronisation of all data with the selected server.
Copy settings Copy the settings of the selected server and starts a new server
setting screen on the next vacant server entry.
Delete Deletes selected server information. When Server one to Server
six is selected, this operation returns the settings to the default
values.
To Do this
1 Start up the connection function Press the MENU key Æ External connection Æ select
Synchronisation.
2 Select a server Select from Server one to Server six, or rename an existing
server to create a new entry.
3 Configure the server settings Press the SK2 (Settings). On Sync. settings screen, set the
server information: Profile name, Server name,
Authentication, User database, Server database,
Synchronisation method, User name, Password, Internet
User name, and Internet password.
Item Description
Profile name Sets the profile name. Server one to Server ten are displayed
as default names (with no settings).
Server name Sets the server name.
Authentication Enables/disables the authentication method. Set Entered by
user to enable user entry on the authentication screen.
Item Description
To Next Page
Loading...
