NEC e616 - Other Possible Operations During a Call

Making and Receiving Calls -22-
Other Possible Operations During a Call
2Talk Note : Press the Options menu key and select Grouptalk to
manage the list of other parties in the Grouptalk.
Pressing the SK1 (Split) key will split the selected caller
from the Grouptalk, and the SK2 (Drop) key will drop the
selected caller from the Grouptalk.
3 End the call Press the End key.
Note : When the headset is connected, closing the handset will
not end the call.
To Do This
Use the Scratchpad If you input keypad characters during a call, the input
characters will remain displayed on the screen after the call is
finished. You can use this function as a screen scratchpad.
Adjust the earpiece volume Press the Side keys to adjust the volume level.
Search the contact list While talking, press the Up and Down key or SK2 (Contact)
key to display the Contact list.
Send DTMF You can send Dual Tone Multi Frequency (DTMF) signals
during a call. Press the Options menu key, select Settings,
Send DTMF tone and then just input the keypad character
needed.
Put a call on hold While talking, press the SK1 (Hold) key, or press the Options
menu key and select Hold call. The call will be put on hold. To
retrieve the call, press the SK1 (Retrieve) key or press the
Options menu key and select Retrieve call.
Swapping the connected and held call When you have a connected call and a held call, press the SK1
(Swap) key, or press the Options menu key and select Swap
calls. The connected call will be put on hold and vice versa.
To Do This