Message -72-
6 Set the addressee Select the address box and press the Enter key, input the
address and press the Enter key (90 characters max. for an
addressee).
Add more addresses if necessary, by repeating the same
operation for the vacant entry in the address box.
Change the address in To address to Cc (Carbon Copy) or
Bcc (Blind Carbon Copy) by pressing the Options menu key
and selecting CC address or BCC address.
Press the SK1 (OK) key to end the address list edition.
Note : A maximum of 70 addresses in total can be set in TO,
CC, and BCC.
Note : To set the addressee from the Contact list, press the
SK2 (Find) key.
Note : If the email address does not contain an @ symbol, the
email may not be delivered to the destination.
7 Send the message Press the SK1 (Send) key. The message is sent and saved in
Sent folder.
To Do this
To Next Page
Loading...
