Electra Elite IPK II Document Revision 1
Barge-In 2 - 81
To Barge-In to a Conference Call:
1. Pick up the handset or press Speaker and dial the service code (default = 710).
If the telephone does not have the proper COS, a warning tone is sent. After the user hangs up, the system
automatically places a callback to the extension.
2. Dial the extension number or press a DSS key of a telephone within a conference call.
N
When a new call is added to the conference, an intrusion tone is heard by all parties in the Conference,
depending on system programming, and all display multiline terminals show the joined party. If a
Conference is not possible:
Q
The extension user will hear a warning tone.
Q
The DISA user will be rerouted to the defined ring group.
Q
The tie line user will hear a busy tone.
Not available for DISA or tie line trunks.
- OR -
1. Dial the extension number of the internal party.
2. Dial the single digit service code or the service code 710.
To Next Page
Loading...
