NEC ELECTRA ELITE IPK II - TAPI Compatibility; Table 2-25 TAPI Commands

Electra Elite IPK II Document Revision 1
TAPI Compatibility 2 - 829
TAPI Compatibility
Description
The system has Telephony Applications Programming Interface (TAPI) capability. TAPI capability
provides:
J Reduced TAPI Feature Set (see the Supported TAPI Commands chart below).
J Caller ID data to the PC for data base lookups and screen pops (see the Caller ID Data chart
below).
J Telephone control (off-hook, on-hook and dialing).
The CTA or CTU adapter provides an interface that allows the user personalized control of the telephone
system from a desktop or laptop PC when used in conjunction with a TAPI-compliant application. The
telephone system and PC are connected by installing an adapter on the telephone multiline terminal,
allowing the PC user to access sophisticated communications services via the telephone lines.
Conditions
 Caller ID and Call status will be available from the TAPI interface functions.
 Refer to Table 2-25 TAPI Commands for a list of supported TAPI commands.
Table 2-25 TAPI Commands
TAPI Commands
lineAddProvider lineAnswer
lineConfigDialog lineBlindTransfer
lineConfigProvider lineCompleteCall
lineGetAddressCaps lineCompleteTransfer
lineGetDevCaps lineDevSpecific
lineGetDevConfig lineDial
lineGetIcon lineDrop
lineGetID lineForward
lineInitializeEx lineHold
lineNegotiateAPIVersion lineMakeCall
lineNegotiateExtVersion linePark
lineRemoveProvider linePickup
lineSetDevConfig linePrepareAddToConference
lineShutdown lineRedirect