Electra Elite IPK II Document Revision 1
SLT Adapter 2 - 751
SLT Adapter
Description
The Single Line Telephone (SLT) Adapter allows a port of an ESIB(8)-U( ) or ESIE(8)-U( ) ETU to
support a Single Line Telephone. A Single Line Telephone can be connected to the ESIB(8)-U( ) ETU
using the SLT Adapter and 2-wire cable. Eight SLT(1)-U( ) ADP Single Line Telephone Adapters can be
installed in the Electra Elite IPK II system.
Conditions
A maximum of eight SLT(1)-U( ) ADPs can be used in the Electra Elite IPK II system.
Dial Pulse and Dual-Tone Multifrequency Single Line Telephones are supported.
The SLT(1)-U( ) ADP does not support voice mail.
Message Waiting LED is not supported.
An SLT connected to an SLT Adapter [SLT(1)-U( ) ADP] cannot perform a Trunk-to-Trunk
Transfer or support a 1-terminal to 2-outside party conference call (R1700 or lower).
Default Setting
None
System Availability
Terminals
Single Line Telephones
Required Component(s)
SLT(1)-U( ) ADP
To Next Page
Loading...
