NEC ELECTRA ELITE IPK II - Flexible System Numbering

Electra Elite IPK II Document Revision 1
Flexible System Numbering 2 - 407
Flexible System Numbering
Description
Flexible System Numbering lets you reassign the system’s port-to-extension assignments. This allows
an employee to retain their extension number if they move to a different office. In addition, factory
technicians can make comprehensive changes to your system’s number plan. You can have factory
technicians:
J Set the number of digits in internal (Intercom) functions. For example, extension numbers can be
up to eight digits long.
J Change your system’s Service Code numbers.
J Assign single digit access to selected Service Codes.
Talk to your sales representative to find out if this program is available to you.
You can also use Flexible System Numbering to change the system’s Trunk Group Routing code.
Although the default code of 9 is suitable for most applications, you can alter the code if needed.
The system provides a completely flexible system numbering plan. Refer to the chart below and the
Electra Elite IPK II Programming Manual for more details.
Flexible System Numbering
Program Description
11-01 System Numbering Set the system’s internal (Intercom) numbering plan. The
numbering plan includes the digits an extension user
must dial to access features and other extensions.
11-09-01 Trunk Access Code Assign the single-digit trunk access code (normally 9).
This is the code users dial to access Automatic Route
Selection or Trunk Group Routing.
11-10 Service Code Setup (for System
Administrator)
11-11 Service Code Setup (for Setup/Entry
Operation)
11-12 Service Code Setup (for Service Access)
11-13 Service Code Setup (for ACD)
11-14 Service Code Setup (for Hotel)
11-15 Service Code Setup, Administrative (for Hotel)
Customize the Service Codes.
11-16 Single Digit Service Code Setup Assign the Single Digit Service Codes. these are the
post-dialing codes a user can dial after placing an
Intercom call to a co-worker.