NEC ELECTRA ELITE IPK II - Table 2-8 Class of Service Options (DISA;E&M Service), Program 20-14

Document Revision 1 Electra Elite IPK II
2 - 194 Class of Service
Operation
To change an extension’s Class of Service (via Service Code 677):
1. Press the Speaker key.
2. Dial 677.
3. Dial the extension number you want to change.
 You see: MODE1:nn
Press HOLD to leave the current value unchanged.
The extension you dial may be set to block your attempt to change their Class of Service.
4. Enter the Day 1 Mode Class of Service for the extension you selected in step 3 and press Hold.
 You see: MODE2:nn
Press HOLD to leave the current value unchanged.
5. Enter the Night 1 Mode Class of Service for the extension you selected in step 3 and press Hold.
 You see: MODE3:nn
Press HOLD to leave the current value unchanged.
6. Enter the Midnight 1 Mode Class of Service for the extension you selected in step 3 and press
Hold.
 You see: MODE4:nn
Press HOLD to leave the current value unchanged.
7. Enter the Rest 1 Mode Class of Service for the extension you selected in step 3 and press Hold.
 You see: MODE5:nn
Press HOLD to leave the current value unchanged.
8. Enter the Day 2 Mode Class of Service for the extension you selected in step 3 and press Hold.
 You see: MODE6:nn
Press HOLD to leave the current value unchanged.
11
DISA/Tie Trunk Barge-In
This option enables or disables a DISA or tie trunk caller’s
ability to use the Barge-In feature.
0 = Off
1 = On
00
12
Retrieve Park Hold
Turn off or on the ability for a DISA caller to retrieve parked or
held calls.
0 = Off
1 = On
11
Table 2-8 Class of Service Options (DISA/E&M Service), Program 20-14 (Continued)
Item
No.
Item
Input
Data
Default
COS
01~14
COS 15