NEC ELECTRA ELITE IPK II - Table 2-18 Selectable Display Message - Character Entry Chart

Electra Elite IPK II Document Revision 1
Selectable Display Messaging 2 - 737
 15-07-01 Programmable Function Keys
Using the Text Message Setup key (18 + message number), a user can easily set the Selectable
Display Messaging feature with the preprogrammed message number.
 20-01-02 System Options - Text Message Mode
Select whether and intercom caller should hear busy (1) or ring through (0) for extensions which
have Selectable Display Messaging set.
 Any extensions previously set with Selectable Display Messaging must cancel the feature and reactivate in
order for a change in this option to take affect.
 20-02-07 System Options for Multiline Telephones - Time and Date Display Mode
Set the System Time and Date display mode. The time that displays in Selectable Display
Messages follows this setting.
 20-06-01 Class of Service for Extensions
Assign a Class Of Service (1~15) to an extension.
 20-13-19 Class of Service Options (Supplementary Service) - Selectable Display Messaging
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to use
Selectable Display Messaging.
 20-16-01 Selectable Display Messages
Program the Selectable Display Messages (1~20). Refer to the chart below for character entry.
Table 2-18 Selectable Display Message - Character Entry Chart
Use this keypad digit . . . When you want to. . .
1 Enter characters:
1 @ [ ¥ ] ^ _ ‘ { | } > <
2 Enter characters A-C, a-c, 2.
3 Enter characters D-F, a-f, 3.
4 Enter characters G-I, g-i, 4.
5 Enter characters J-L, j-l, 5.
6 Enter characters M-O, m-o, 6.
7 Enter characters P-S, p-s, 7.
8 Enter characters T-V, t-v, 8.
9 Enter characters W-Z, w-z, 9.
0 Enter characters:
0 ! “ # $ % & <space> ( )
, Enter characters:
, + , - . / : ; < = > ?