Electra Elite IPK II Document Revision 1
Repeat Redial 2 - 697
Repeat Redial
Description
If a multiline terminal user places a trunk call that is busy or unanswered, they can have Repeat Redial
try it again later on. The user does not continually have to try the number again – hoping it will go
through. Repeat Redial automatically retries it until the called party answers (the number of retries is
based on system programming).
Conditions
Lifting the handset during a callout cycle will cancel Repeat Redial.
Other programmed options for outgoing calls can affect how a Repeat Redial call is placed.
Refer to Central Office Calls, Placing options as needed.
For systems with Automatic Route Selection (ARS), ARS selects the trunk for the Repeat
Redial call.
Single line telephones cannot use Repeat Redial.
Default Setting
Enabled
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
To Next Page
Loading...
