NEC ELECTRA ELITE IPK II - STATION SPEED DIAL - DIAL ACCESS; To store a Station Speed Dialing number (display telephones only)

Document Revision 1 Electra Elite IPK II
2 - 22 Account Code – Forced/Verified/Unverified
1. Access trunk for outside call.
 You can access a trunk by pressing a line key or dialing a code. Refer to Central Office Calls, Placing on page
2-171 for more information.
2. Dial , .
- OR -
Press your Account Code key (PGM 15-07-01 or SC 751: code 50).
3. Dial your Account Code [1~16 digits, using 0~9 and # or (3~16 digits for Forced)].
 If you make an incorrect entry, your system may automatically alert the operator. If Account Codes are hidden,
each digit you dial will show an “ , ” character on the telephone’s display (depending on programming).
4. Dial , .
- OR -
Press your Account Code key (PGM 15-07-01 or SC 751: code 50).
5. Dial the number you want to call.
 If you hear “stutter dial tone after dialing the number, ARS is requesting that you enter an Automatic Route
Selection Authorization Code. Refer to Automatic Route Selection on page 2-65 for more information.
To dial an outside number and let your system tell you when a Forced Account Code is required:
1. Access a trunk and dial the number you want to call.
 If you hear “stutter dial tone after dialing the number, ARS is requesting that you enter an ARS Authorization
Code. Refer to Automatic Route Selection on page 2-65 for more information.
2. Wait for your call to go through.
- OR -
3. If you hear “Please enter an Account Code,” (depending on system programming) and your
display shows ENTER ACCOUNT CODE.
N Dial , .
- OR -
Press your Account Code key (PGM 15-07-01 or SC 751: code 50)
N Dial your Account Code (3~16 digits, using 0~9 and #).
If Account Codes are hidden, each digit you dial will show an “ , ” character on the telephone’s display.
N Dial , .
- OR -
Press your Account Code key (PGM 15-07-01 or SC 751: code 50)