NEC ELECTRA ELITE IPK II - Call Redirect

Electra Elite IPK II Document Revision 1
Call Redirect 2 - 135
Call Redirect
Description
Call Redirect allows a multiline terminal user to transfer a call to a pre-defined destination (such as an
operator, voice mail, or another extension) without answering the call. This can be useful if you are on a
call and another rings in to your extension. By pressing the Call Redirect key, the call is transferred,
allowing you to continue with your current call.
This feature works with the following types of calls:
J Normal trunk call
J DID
J DISA
J DIL
J E&M
J ICM
The following types of calls cannot be redirected with the feature:
J ACD
J Transferred
J Department Group (all ring mode)
J Door Box
J Virtual Extension
Conditions
 After pressing the Call Redirect key, the call will not recall to the extension.
 The pre-defined destination has to be an extension number or voice mail pilot number.
Default Setting
Enabled