Electra Elite IPK II Document Revision 1
Programming from a Multiline Terminal 2 - 683
Programming from a Multiline Terminal
Description
System Programming can be performed from any display multiline terminal. Most programming
changes become effective immediately. Other programming changes become effective after the data is
backed up from temporary memory to permanent memory.
Conditions
Multiple stations and/or Web Pro Programming can program the system at the same time.
PC Programming and Programming from a Multiline Terminal cannot be performed at the
same time.
Programming from a Multiline Terminal can require a password to enter programming.
Default Setting
Enabled
System Availability
Terminals
Multiline Terminals with Display
Required Component(s)
ESI (8)-U() ETU
ESIB(8)-U() ETU
ESIE(8)-U() ETU
To Next Page
Loading...
