Electra Elite IPK II Document Revision 1
Drop Key 2 - 345
Drop Key
Description
The Drop Key abandons a call while retaining the PBX/Centrex line to originate another call. The Drop
Key is provided by programming a Programmable Function Key. This feature allows the Recall key to
be used to provide a hookflash to the PBX or Central Office. A single line telephone user can use the
Drop Key function by an access code.
Conditions
The Drop key provides a timed disconnect signal on CO/PBX lines.
The Drop key cannot be used for internal, DID, or Tie line calls.
Default Setting
None
System Availability
Terminals
All Stations
Required Component(s)
None
To Next Page
Loading...
