NEC ELECTRA ELITE IPK II - Page 215

Electra Elite IPK II Document Revision 1
Class of Service 2 - 193
Table 2-8 Class of Service Options (DISA/E&M Service), Program 20-14
Item
No.
Item
Input
Data
Default
COS
01~14
COS 15
01
First Digit Absorption
For tie lines, enable or disable the ability to absorb (ignore)
the first incoming digit. Use this to make the tie trunk
compatible with 3- and 4-digit tie line service. This option
does not apply to DISA.
0 = Off
1 = On
00
02
Trunk Group Routing/ARS Access
This option enables or disables a DISA or tie trunk caller’s
ability to dial 9 for Trunk Group Routing or Automatic Route
Selection (ARS).
0 = Off
1 = On
11
03
Trunk Group Access
This option enables or disables a DISA or tie trunk caller’s
ability to access trunk groups for outside calls (Service Code
704).
0 = Off
1 = On
11
04
System Speed Dialing
This option enables or disables a DISA or tie trunk caller’s
ability to use the system’s System Speed Dialing.
0 = Off
1 = On
00
05
Operator Calling
This option enables or disables a DISA or tie trunk caller’s
ability to dial 0 for the telephone system operator.
0 = Off
1 = On
11
06
Internal Paging
This option enables or disables a DISA or tie trunk caller’s
ability to use the telephone system’s Internal Paging.
0 = Off
1 = On
11
07
External Paging
This option enables or disables a DISA or tie trunk caller’s
ability to use the telephone system’s External Paging.
0 = Off
1 = On
11
08
Direct Trunk Access
This option enables or disables a DISA or tie trunk caller’s
ability to use Direct Trunk Access (Service Code 815).
0 = Off
1 = On
00
09
Forced Trunk Disconnect <Not for ISDN T-point>
This option enables or disables a tie trunk caller’s ability to
use Forced Trunk Disconnect (Service Code *26). This
option is not available to DISA callers.
0 = Off
1 = On
00
10 Call Forward Setting by Remote Via DISA
Enable or disable a DISA callers ability to use the Call
Forward service codes (Programs 11-11-01 through
11-11-05).
0 = Off
1 = On
00