Document Revision 1 Electra Elite IPK II
2 - 408 Flexible System Numbering
Conditions
Programming follows a telephone’s extension number, not the port number in most cases.
If you relocate a telephone, you may need to change additional programming.
If the extension numbering plan is changed from ‘3xx’ to ‘2xx’, and you would like to
consecutively press two DSS keys without toggling the hookswitch, Program 11-16-05
must be removed. If not, pressing the second DSS key will actually camp you on to the first
extension.
Since making changes in Program 11-01 does not automatically make any other changes
in any other program, changing the number plan after the system is in operation may cause
problems in the following programs:
Any feature which requires dialing a code or extension number can be affected.
11-01 Type 2
(Extension Number)
11-01 Type 1
(Service Codes)
11-02 11-08 15-12 22-11 11-10 11-14 21-11
11-04 11-17 16-01-01 25-06 11-11 11-15 30-03
11-06 15-01-01 15-14 30-03 11-12 15-07
11-07 15-07 21-11 11-13 15-14
To Next Page
Loading...
