NEC ELECTRA ELITE IPK II - Page 114

Document Revision 1 Electra Elite IPK II
2 - 92 Call Arrival (CAR) Keys
Related Features
Call Queuing
Virtual Extensions
Programming
 11-04-01 Virtual Extension Numbering
Virtual Extension Ports (V-Port) = 1~256
Virtual Extension Number = Extension Number
 15-01-01 Basic Extension Data Setup - Extension Name
Assign the extension name.
 15-02-07 Automatic Hold for CO Lines
0 = Hold
1 = Disconnect
 15-01-05 Basic Extension Data Setup - Restriction for Outgoing Disable on Incoming Line
Enable (1) or disable (0) supervised dial detection for an extension.
 15-02-21 Multiline Telephone Basic Data Setup, Virtual Extension Access Mode
Virtual Extension Key Mode 0 = DSS (default)
1 = OTG (Outgoing)
2 = Ignore
 15-07-01 Programmable Function Keys
KYxx = Key Number 01~32
KY01 = ∗03 (∗01 by default)
 15-08-01 Incoming Virtual Extension Ring Tone Setup
ICM Tone Pattern 0 = Pattern 1 (default)
1 = Pattern 2
2 = Pattern 3
3 = Pattern 4
 15-09-01 Virtual Extension Ring Assignment
Mode1: 0 = No (default)
1 = Yes