Electra Elite IPK II Document Revision 1
Call Forwarding, Off-Premise 2 - 117
20-06-01 Class of Service for Extensions
Assign a Class Of Service (1~15) to an extension.
20-11-17 Class of Service Options (Hold/Transfer Service) - Department Group Trunk-to-Trunk
Forwarding
Enable (1) or disable (0) an extension within a Department Group’s ability to use the Trunk-to-
Trunk Forwarding service codes.
24-05-01 Department Group Transfer Target Setup
Assign the Abbreviated Dialing number bin (0~1999) which should be used as the destination of
the Department Group’s Trunk-to-Trunk Forwarding.
Trunk-to-Trunk Forwarding - DID (3) Trunk Forwarding Using DID Translation Table (in addition to
above programming)
Refer to Direct Inward Dialing (DID) for additional DID programming.
22-11-05 DID Translation Table Number Conversion - Transfer Destination 1
22-11-06 DID Translation Table Number Conversion - Transfer Destination 2
For each DID Translation Table entry (1-2000), specify the first and second Transfer
Destinations if the callers receives a busy or no answer (action defined in 22-11-04).
Destination Options:
0 = No Setting
1~100 = Incoming Group
102 = In-Skin/External Voice Mail
103 = Centralized Voice Mail
01~264 = Department Group
400 = DID
401 = DISA
1000~1999 = Abbreviated Number (000~999)
If the Transfer Destinations are busy or receive no answer, those calls are transferred to the final
transfer destination (Program 22-10).
Operation
To activate Call Forwarding Off-Premise non-split:
1. At a multiline terminal, press the Speaker key.
- OR -
At a single line telephone, lift the handset.
2. Dial the Call Forwarding Service Code. (Refer to Table 3-2 Service Codes by Number or Table 3-3
Service Codes by Feature.)
- OR -
To Next Page
Loading...
