Electra Elite IPK II Document Revision 1
Caller ID 2 - 149
If Program 20-09-06 : Class of Service Options (Incoming Call Service ) : Incoming Time
Information Display is set to "1" (Call Time Displayed), the first line will display the time and
date.
When you shut down the system, incoming history data is cleared. But you can back up the
history data by pressing Speaker +
∗#∗9.
Default Setting
Disabled
System Availability
Terminals
All Multiline Terminals with a display and Single Line Telephones equipped to receive Caller ID
Required Component(s)
COIB(4)-U( ) ETU (in COID mode)
COIB(8)-U( ) ETU (in COID mode)
BRT(4)-U(20) ETU with Firmware 3.00 or higher
DTI -U40 ETU with Firmware 5.0 or higher
SLIB/E -U( ) (in COID mode)
To Next Page
Loading...
