Electra Elite IPK II Document Revision 1
Central Office Calls, Placing 2 - 177
3. Dial the number.
- OR -
1. At the multiline terminal, press the Trunk Group Routing key (PGM 15-07-01 or SC 752:
,
05).
2. Dial the number.
To place a call over a specific trunk:
1. Dial #9.
2. Dial the line number (e.g., 005 for line 5).
3. Dial the number.
- OR -
1. At the multiline terminal, press line key (PGM 15-07-01 or SC 752: 001 to 200).
2. Dial the number.
To Busy Out a Trunk from Outbound Usage:
1. Press Speaker + 645 + Trunk Number (001~200) + 1.
The user which busied out the trunk will still have access to it. All other users will be blocked from seizing it to
place an outgoing call. The trunk, however, can still be answered by any users programmed with the trunk
access.
To Remove a Trunk from a Busied Out State:
1. Press Speaker + 645 + Trunk Number (001~200) + 0.
To Next Page
Loading...
