Electra Elite IPK II Document Revision 1
Class of Service 2 - 185
Table 2-4 Class of Service Options (Incoming Call Service), Program 20-09
Item
No.
Item
Input
Data
Default
Related
ProgramCOS
01~14
COS 15
01
Second Call for DID/ DISA/ DIL/ E&M
Turn off or on the extension’s ability to receive a second
call from a DID, DISA, DIL, or tie line caller.
With this option set to ‘1’, the destination extension must be busy
in order for a second DNIS caller to ring through. If the
destination extension does not have a line or Call Appearance
(CAP) Keys available for the second call and a previous call is
ringing the extension but has not yet been answered, the second
caller will hear busy regardless of this program’s setting.
0 = Off
1 = On
00
02
Caller ID Display
Turn off or on the Caller ID display at an extension.
0 = Off
1 = On
00
03
Sub Address Identification
Define whether an extension displays the Caller
Sub-Address.
0 = Off
1 = On
00
04
Notification for Incoming Call List Existence
Determine whether an extension’s display will show
“Check List” when an incoming call has been missed by a
user.
0 = Off
1 = On
0 0 20-09-02
05
Setting Handsfree Answerback or Forced Intercom Ringing
Turn off or on an extension’s ability to enable Handsfree
Answerback or Forced Intercom Ringing for their incoming
Intercom calls.
0 = Off
1 = On
1111-11-15
11-11-16
06
Incoming Time Information Display
If this option is set to “1”, the Incoming Call Time is
displayed on the multiline terminal’s LCD while the
telephone is ringing.
0 = Off
1 = On
00
07
Call Queuing
Turn off or on and extension’s ability to have multiple calls
queue to their extension.
0 = Off
1 = On
11
To Next Page
Loading...
