Document Revision 1 Electra Elite IPK II
2 - 222 Code Restriction Override
Operation
To temporarily override a restricted extension’s Code Restriction:
You can override restriction for only one call at a time.
1. At the multiline terminal, press the Speaker key.
- OR -
At single line telephone, lift the handset.
2. Dial 775.
3. Dial the 4-digit Code Restriction Override code.
If you wait too long before going to the next step, you may have to repeat the procedure. After dialing the service
code, the display will indicate the override codes as they are being entered. As the last digit is entered, the
display is cleared and ICM dial tone is heard.
You will hear error tone if you dial your code incorrectly.
4. Press idle line key or dial trunk access code.
5. Dial the number without any restriction.
To use your Walking Code Restriction level at an extension:
You can override restriction for only one call at a time.
1. At the multiline terminal, press the Speaker key.
- OR -
At the single line telephone, lift the handset.
2. Dial 663 and dial the 6-digit Walking Toll Restriction Class of Service code.
After dialing the service code, the display will indicate the override codes as they are being entered. As the last
digit is entered, the display is cleared and ICM dial tone is heard.
You will hear error tone if you dial your code incorrectly.
3. Press idle line key or dial trunk access code.
4. Dial the number.
The call is allowed or denied based on the user’s Toll Restriction Class of Service level.
To Next Page
Loading...
