Document Revision 1 Electra Elite IPK II
2 - 238 Continued Dialing
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Pulse to Tone Conversion
Toll Restriction
Programming
15-03-03 Single Line Telephone Basic Data Setup - Terminal Type
Enter 1 for this option to allow a single line port to receive DTMF tones after the initial call setup.
Enter 0 to have the port ignore DTMF tones after the initial call setup. For Voice Mail, always
enter 1 (e.g., receive DTMF tones).
20-06-01 Class of Service for Extensions
Assign a Class Of Service (1~15) to an extension.
20-13-13 Class of Service Options (Supplementary Service) - Continued Dialing
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to use
Continued Dialing for Intercom calls to 2500 type devices.
21-04-01 Toll Restriction Class
Assign a Toll Restriction Class (1~15) to an extension.
21-05-04 Toll Restriction Class - Maximum Number of Digits Table Assignment
Assign a Maximum Number of Digits Table to each Toll Restriction Class.
21-06-03 Toll Restriction - Maximum Number of Digits Table Assignment
Set the Maximum Number of digits dialed for each table.
To Next Page
Loading...
