Electra Elite IPK II Document Revision 1
Cordless Telephone Connection 2 - 243
To answer a call using a cordless single line telephone:
When the Multiline Terminal is ringing, the incoming call can be answered by the cordless single line
telephone user by going off-hook, when ringing line preference is assigned for the multiline terminal.
To transfer a call from a cordless Single Line Telephone to its associated multiline terminal:
1. The multiline terminal user goes off-hook.
2. The single line telephone user goes on-hook (at this time, the call is automatically connected to the
multiline terminal).
To transfer a call from a multiline terminal to its associated cordless single line telephone:
1. The single line telephone user goes off-hook (at this time, the call is automatically connected to the
Single Line Telephone).
2. The multiline terminal user goes on-hook.
To use Hookflash:
Refer to operation for Single Line Telephone Access.
To Next Page
Loading...
