Document Revision 1 Electra Elite IPK II
2 - 264 Dialing Number Preview
Related Features
Central Office Calls, Placing
Voice Response System (VRS)
Programming
20-06-01 Class of Service for Extensions
Assign a Class Of Service (1~15) to an extension.
20-08-05 Class of Service Options (Outgoing Call Service) - Dial Number Preview
In an extension Class of Service, enable (1) or disable (0) an extension’s ability to use Dial
Number Preview.
Operation
To use Dial Number Preview to place a call (multiline terminal only):
1. Do not lift the handset or press the Speaker key.
2. To preview any number, dial the number you wish to call.
With VRS installed, you must first press
,
to preview the number.
To preview a Speed Dial – System/Group number, press the Redial key and dial the
Speed Dial – System/Group bin number you want to call.
The number displays.
3. To dial out the displayed trunk number, press a Line/CAP/Trunk Group key.
If the previewed number as a trunk access code (e.g., 9), you can press Speaker key instead.
- OR -
To dial an Intercom number, press the Speaker key.
- OR -
To cancel the number without dialing it out, press Hold.
To Next Page
Loading...
