Document Revision 1 Electra Elite IPK II
2 - 328 Directory Dialing
Related Features
Last Number Redial
Speed Dial - System/Group/Station
Softkeys
Programming
21-01-02 System Options for Outgoing Calls - Intercom Interdigit Time
If a user waits longer than this interval between Directory Dialing steps, Directory Dialing
automatically cancels.
Operation
To use Directory Dialing from a multiline terminal with an LCD:
1. Lift the handset or press the Speaker key.
2. Press the Dir softkey.
3. Press the softkey for the Directory Dialing type:
N
SYS – Company (Common) System Speed Dials
N
SPDg – Department (Group) Speed Dials
N
STA – Personal Speed Dials
N
EXT – Co-worker’s Extensions
Directory Dialing follows any feature restrictions that your system may have enabled. For example, if your
extension cannot normally use Speed Dial – System/Group/Station, Directory Dialing can not access it either.
4. Dial letter/number range for the party you want to call (e.g., dial 2 for A, B, C or 2).
You can enter several letters to help narrow the search.
Press # to enter additional letters on the same key (ex: TOM = 8666#6).
5. Press the Down Arrow Softkey to jump to that section.
6. Press Volume
or
to scroll through the list.
If you wait too long between your selections, Directory Dialing automatically cancels.
7. Lift the handset or press the DIAL softkey, or press the Speaker key to place the selected call.
If you selected an outside call, the call will route according to your system’s Trunk Group Routing/ARS setup.
To Next Page
Loading...
