NEC ELECTRA ELITE IPK II - Page 369

Electra Elite IPK II Document Revision 1
Drop Key 2 - 347
Operation
To use the Drop key from a Multiline Terminal with a CO/PBX call in progress:
1. Press the Function key programmed as a Drop key.
2. Receive the new CO/PBX dial tone.
3. Dial the desired number.
To use the Feature Key plus Recall key from a Multiline Terminal with a CO/PBX call in progress:
1. Press the Feature key.
2. Press the Recall key.
 Receive the new CO/PBX dial tone.
3. Dial the desired number.
To use the Drop key feature from a single line telephone with a CO/PBX call in progress:
1. Hookflash.
2. Receive internal dial tone.
3. Dial the Service Code (PRG 11-12-59, Default Not Assigned).
4. Receive the new CO/PBX dial tone.
5. Dial the desired number.