NEC ELECTRA ELITE IPK II - Page 402

Document Revision 1 Electra Elite IPK II
2 - 380 Electra Elite IPK Terminals
 The LCD of the Electra Elite IPK II Terminal provides a volume bar indication, while
adjusting the following volume levels or controls:
J Speaker Volume
J Handset/Headset Volume
 BGM Volume
 Ring Volume/off-hook Ring Volume
 LCD Contrast
 Only English displays are provided (SPEAKER, HANDSET, RING, LCD).
 The MIC Key controls the built-in microphone during speakerphone mode and controls the
handset mute feature during handset/headset operation.
 The DIR Key performs the same function as the Caller ID Scroll Key.
 The MSG Key acts as a VM access key to call the VM pilot number (Feature selection
15-02-26).
 The distance from the KSU for IPK Multiline Terminals (DTH type) can be extended when
local AC power is provided. When the IPK Terminal is powered by a local AC-R Unit (AC
Adapter), a built-in Long Line Adapter allows these telephones to be connected up to a
distance of 2000 feet by Twisted 1-Pair Cable at 24 AWG.
 For compatibility of Adapter Units and Terminals, refer to the following table:
Terminal
Adapter Unit DTH-16LD-1 DTH-32D-1 DTH-16D-1 DTH-8D-1 DTH-8-1 ITH-16D-2 ITH-8D-2
AD(A)-R X X X X X – –
AP(A)-R X X X X X – –
AP(R)-R X X X X X – –
CT(A)-R X X X X X – –
CT(U)-R X X X X X – –
HF-R X X X X X – –
IP-R(IPK) X X X X – – –
Button Units
BS(F)-R( ) UNIT X X X X X X X
BS(S)-R( ) UNIT X X X X X X X
Other
WM-R UNIT X X X X X X X
AC-R UNIT X X X X X X X