Electra Elite IPK II Document Revision 1
Elite CallAnalyst 2 - 395
System Availability
Terminals
All Terminals:
Incoming CO/PBX Call
Outgoing CO/PBX Call
Conference CO/PBX Call
Transferred CO/PBX Call
Required Component(s)
Serial Connection for SMDR over Serial
- OR -
LAN Connection for SMDR over Ethernet
Minimum PC Requirements:
PC with Pentium Processor
64 Mb Ram
VGA monitor 800 X 600 resolution (SVGA 1024 X 768 recommended)
Windows 95/98 Me, NT-SP 3 or later, 2000
80 Mb free hard drive space
CD-ROM drive (When using CD for installation)
Available serial port and RS-232 cable
Printer for reports
The Elite CallAnalyst software should be installed on a separate PC, but other applications
may be installed. Performance depends on the need for memory and processing for the
other applications.
To Next Page
Loading...
