Document Revision 1 Electra Elite IPK II
2 - 428 Handsfree and Monitor
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Programming
15-02-08 Multiline Telephone Basic Data Setup - Automatic Handsfree
Use this option to set whether pressing a key accesses a One-Touch Key (1) or if it pre-selects
the key (0).
15-02-16 Multiline Telephone Basic Data Setup - Handsfree Operation
Enable (1) or disable (0) an extensions ability to use the speakerphone on outside calls. When
disabled, users can hear the conversion, but cannot respond handsfree.
20-06-01 Class of Service for Extensions
Assign Class of Service (1~15) for extensions.
20-02-12 System Options for Multiline Telephones - Forced Intercom Ringing
Use this option to enable (1) or disable (0) Forced Intercom Ringing. If enabled, incoming
Intercom calls normally ring. If disabled, Intercom calls voice-announce.
20-09-05 Class of Service Options (Incoming Call Service) - Setting Handsfree Answerback or
Forced Intercom Ringing
Allow (1) or prevent (0) an extension form enabling Handsfree Answerback or Forced Intercom
Ringing for their incoming intercom calls.
To Next Page
Loading...
