Electra Elite IPK II Document Revision 1
Headset Operation 2 - 437
Operation
To enable the headset:
1. Plug in the headset into the headset jack on the bottom of the telephone.
2. Program a Headset key (PGM 15-07 or SC 751: 05).
You hear a confirmation beep.
To use the headset:
The Headset key lights when you’re on a call. To disconnect, press the Headset key again.
You can still use the handset for calls or respond to voice-announced Intercom calls with the headset
plugged in. The headset only activates when the Headset key is pressed.
J
Answer a ringing call by pressing the Headset key.
- OR -
J
Press the Headset key and then a line key or press the Speaker key then 9 to make a outgoing
call.
- OR -
J
Press the Headset key to get intercom dial tone.
- OR -
J
If on a call, press the Headset key to hang up.
To Next Page
Loading...
